Fujitsu Eternus DX80 S2 User Manual page 122

Appendix A Event Notification Message List
A.2 Message List
Event type
M E2070016
M E2070017
M E2070018
M E2070019
M E8010xxx
M E8020xxx
M E8050xxx
M E8070xxx
M E8080xxx
M E8090xxx
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
Trap
code
Maintenance
No.
Info
7 E2070016
7 E2070017
7 E2070018
7 E2070019
7 E8010xxx
7 E8020xxx
7 E8050xxx
7 E8070xxx
7 E8080xxx
7 E8090xxx
Copyright 2012 FUJITSU LIMITED
Upper: Message
Lower: Description
NOT READY(22:No Version)
The device is in Not Ready status.
The version table is invalid.
NOT READY(23:AC Input Shortage)
The device is in Not Ready status.
AC power input is insufficient.
NOT READY(24:Configuration Data restored from
System Disk)
The device is in Not Ready status.
Configuration information is restored using the backup
area due to the replacement of a CM (including BUD).
NOT READY(25:BUD Capacity Shortage)
The device is in Not Ready status.
BUD capacity is insufficient.
TPP#xxx turned to CAUTION(decrease of available
capacity)
Usage status of the Thin Provisioning Pool is changed:
Normal to Caution
xxx: TPP number (hexadecimal)
TPP#xxx turned to WARNING(decrease of available
capacity)
Usage status of the Thin Provisioning Pool is changed:
Normal to Warning or Caution to Warning
xxx: TPP number (hexadecimal)
TPP#xxx was all allocated
There is no more available capacity in the Thin Provision-
ing Pool.
xxx: TPP number (hexadecimal)
FTRP#xxx turned to CAUTION(decrease of available
capacity)
Usage status of the Flexible Tier Pool is changed:
Normal to Attention
xxx: FTRP number (hexadecimal)
FTRP#xxx turned to WARNING(decrease of available
capacity)
Usage status of the Flexible Tier Pool is changed:
Normal to Warning or Attention to Warning
xxx: FTRP number (hexadecimal)
FTRP#xxx was all allocated
There is no more available capacity in the Flexible Tier
Pool.
xxx: FTRP number (hexadecimal)
122
Remarks
These messages
are notified when
"Not ready" is
enabled for Error
Severity Level in
the event
notification
setting. They are
not notified
during
maintenance
operations.
These mes-
sages are noti-
fied when "Thin
Provisioning Pool
Rate" is enabled
for Error Severity
Level in the event
notification
setting. They are
not notified dur-
ing maintenance
operations.
P3AM-4842-03ENZ0