9
Check that the AUTO POWER switch is set to the "OFF" position.
5.2.4
Additional Drive Enclosure Installation
This section describes how to install a drive enclosure for the ETERNUS2000.
1
First check that all the components of the ETERNUS2000 are in normal status,
using the Device Status display menu of the maintenance program.
2
Wear an antistatic wrist strap or touch the metal frame of the ETERNUS2000 to
discharge static electricity.
3
Stop all I/O access by the server(s).
P3AM-2512-03EN
ETERNUS2000 disk storage system User Guide
DE_No. label is attached to the base device.
Point
AUTO POWER
switch
Copyright 2009 FUJITSU LIMITED
Chapter 5 Installing Optional Products
5
131