Installing Ac Outlet Box - Fujitsu Eternus2000 Manual

3.2.3

Installing AC Outlet Box

This section describe how to mount the AC outlet box in the rack.
Make sure to check the "ETERNUS2000 models 100 and 200 disk storage system Safety Precautions"
before installing the AC outlet box. Also, note the following.
3.2.3.1 For 1U AC outlet box
This section describes how to mount the 1U AC outlet box in a rack.
1
Refer to "ETERNUS2000 models 100 and 200 disk storage system Package
Contents" to confirm there are no missing parts for the rack mount kit.
2
Attach the brackets and holders to the rack.
M6 screws
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Electrical Shock
WARNING
For these operations, be sure to turn off the device connected to the
ETERNUS2000 (such as servers) when it is turned on, and remove
the power cord from the outlet or it may lead to electronic shock.
Do
CAUTION
AC outlet box cannot be connected to the device other than
ETERNUS2000.
When the holes in the rack pillars are square, use the screw hold-
Point
ers to attach.
Bracket A
Screw
holders
Holder
(Rear rack pillars)
M6 screws
Copyright 2009 FUJITSU LIMITED
Holder
Bracket B
Screw
holders
Chapter 3 Installation
3
55