Installing Ac Outlet Box - Fujitsu Eternus DX60 User Manual

Chapter 3 Installation
> 3.2 Rack Installation
3.2.3

Installing AC Outlet Box

This section describe how to mount the AC outlet box in the rack.
3.2.3.1 For 1U
This section describes how to mount the 1U AC outlet box in a rack.
Procedure
1
2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Electric Shock
WARNING
• For these operations, be sure to turn off the device connected to the
ETERNUS DX60/DX80 (such as servers) when it is turned on, and
remove the power cord from the outlet or it may lead to electronic
shock.
Do
CAUTION
• AC outlet box cannot be connected to the device other than
ETERNUS DX60/DX80.
Refer to "ETERNUS DX60/DX80 Disk storage system Package Contents" to
confirm there are no missing parts for the rack mount kit.
"ETERNUS DX60/DX80 Disk storage system Package Contents"
Refer
Remove the two brackets temporarily attached to the AC outlet box.
Remove the two M3 screws from the front of the AC outlet box to free the brackets.
Bracket A
AC outlet box
M3 screw
M3 screw
Bracket B
75
Copyright 2009 FUJITSU LIMITED