Chapter 4 Setup
>
4.3 ETERNUS DX60/DX80 Setup
For SAS
On the [Set SAS Port Parameters] screen, set the information for the connection (detailed SAS
port information) between the ETERNUS DX60/DX80 SAS port and the server.
Procedure
1
2
IMPORTANT
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
In the GUI screen, click [Set
Management] menu on the [Global Settings] tab.
The [Set SAS Port Parameters] screen appears.
Select a port and specify the necessary items in "Port Settings", and click the
[Set] button.
•
Host Affinity
When the Host Affinity function is used, select "Enable".
When the Host Affinity function is not used, select "Disable".
•
Host Response
Set this item if "Host Affinity" has been set to "Disable".
Figure 4.29 [Set SAS Port Parameters] screen
This completes the basic settings of the ETERNUS DX60/DX80.
When performing other detailed settings, refer to "ETERNUS DX60/DX80
Web GUI User Guide".
Port Parameters] under the [Host I/F
SAS
136
End of procedure
Copyright 2009 FUJITSU LIMITED