Fujitsu Eternus DX60 User Manual page 76

Chapter 3 Installation
> 3.2 Rack Installation
3
4
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
Attach the brackets and holders to the rack.
When the holes in the rack pillars are square, use the screw holders
to attach.
Bracket A
Screw
holders
M6 screws
Holder
(Rear rack pillars)
M6 screws
The four M6 screw positions for the brackets are determined relative to the AC outlet box
base line.
The M6 screws should be inserted in the 1st and 3rd holes above the base line.
(Rear rack pillars)
[Left]
3rd position
(M6 screws)
1U AC outlet box
1st position
(M6 screws)
Base line of
AC outlet box
Mount the AC outlet box in the rack.
Fasten the AC outlet box to the bracket with the two M3 screws removed in
M3 screw
(Rear rack pillars)
M3 screw
Holder
Bracket B
Screw
holders
[Right]
3rd position
(M6 screws)
1st position
(M6 screws)
Brackets
76
Step 2.
Copyright 2009 FUJITSU LIMITED