Chapter 3 Installation
>
3.2 Rack Installation
3.2
Rack Installation
This section describes the procedure for installing the ETERNUS DX60/DX80 in a rack.
Make sure to check "ETERNUS DX60/DX80 Disk storage system Safety Precautions" before
installation. Also refer to the manual provided with racks.
Refer
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
"ETERNUS DX60/DX80 Disk storage system Safety Precautions"
Manual provided with racks
Do
CAUTION
•
Make sure to wear a wrist strap before starting each operation, as
failure to discharge static electricity may cause a device failure.
Do not remove it until the operation is complete.
•
If components are attached or removed in a way other as described
herein, damage and/or device failure or electrical shock may occur.
•
This device contains delicate components, and should be handled
gently. Do not drop or knock the device against the rack when
installing it.
•
If no other components are installed, attach the blind panels
provided with the rack.
66
Copyright 2009 FUJITSU LIMITED