Fujitsu Eternus DX60 User Manual page 80

Chapter 3 Installation
> 3.2 Rack Installation
4-2
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
- Attachment procedure
M5 cage nut
Clip the cage nut tabs into the desired
hole from the inside.
Side view
M5 cage nut
Rack pillar (square)
Fasten the blank panel to the prepared holes in the pillars with four M5 screws.
AC outlet box
(Rear rack pillars)
M5 rack nut
Clip the rack nut over the desired
hole from the side.
M5 Rack nut
Rack pillar (round)
Blank panel
(Front rack pillars)
80
M5 screws
M5 screws
End of procedure
Copyright 2009 FUJITSU LIMITED