Fujitsu Eternus DX60 User Manual page 95

Chapter 4 Setup
> 4.2 Cable Connection
MiniSAS cable connection procedure
The following explains how to connect the miniSAS cable.
IMPORTANT
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
• When connecting miniSAS cables, always check the symbols on the
connector and port are matching.
- SAS (OUT) of CE or DE: Attach the connector with the
the port with the
SAS (OUT) port
- SAS (IN) of DE: Attach the connector with the
with the symbol.
SAS (IN) port
• When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
95
symbol.
Plug connecting to SAS (OUT) port
Plug connecting to SAS (IN) port
Copyright 2009 FUJITSU LIMITED
symbol to
symbol to the port