This guide introduces the ETERNUS DX60/DX80 to the user and explains how to check and
maintain the ETERNUS DX60/DX80 on a regular basis.
Refer to the manuals for each peripheral concerning details not included in this manual.
Organization
This manual is organized as follows:
•
Chapter 1 Overview
This chapter provides an external view of the ETERNUS DX60/DX80, and explains the
special features, data configurations of RAID groups, and specifications of the ETERNUS
DX60/DX80.
•
Chapter 2 Hardware
This chapter describes the hardware components of the ETERNUS DX60/DX80 and details
of the basic operation methods of the ETERNUS DX60/DX80, such as how to turn the power
on and off.
•
Chapter 3 Installation
This chapter describes the ETERNUS DX60/DX80 installation.
•
Chapter 4 Setup
This chapter describes how to connect and setup the ETERNUS DX60/DX80 for operation.
•
Chapter 5 Installing Optional Products
This chapter describes how to attach optional products.
•
Chapter 6 Operation and Troubleshooting
This chapter describes points to note when operating and performing maintenance for the
ETERNUS DX60/DX80. Also, this chapter describes how to respond to any problems which
may occur.
Read this chapter when operating or performing maintenance on the ETERNUS DX60/DX80,
or if an error
"Specifications", "Events detected by ServerView", and "About Using of Open Sources" are
described as appendixes.
Refer to the manuals for each peripheral concerning details not included in this manual.
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
About this Manual
6
Copyright 2009 FUJITSU LIMITED