Fujitsu Eternus DX60 User Manual page 129

Chapter 4 Setup
> 4.3 ETERNUS DX60/DX80 Setup
7
7-1
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
(2)
Change the setting as required, and click the [Set] button.
Figure 4.24 [Define LUN Mapping] screen 2 (when the Host Affinity function is not
used)
A confirmation screen appears.
(3)
Click the [OK] button.
Returns to the screen of "Port List" in
(4)
Click the [Exit] button.
A message to confirm finishing the Configuration Wizard appears.
Finish Configuration Wizard.
Click the [OK] button.
Configuration Wizard finishes.
Step (1).
129
End of procedure
Copyright 2009 FUJITSU LIMITED