Chapter 4 Setup
>
4.2 Cable Connection
4.2.6.1
With No AC Outlet Box
The following explains how to connect the power cords when no AC outlet boxes are installed.
Two power cords (4m) are provided for each enclosure.
Procedure
1
1-1
1-2
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
Connect the power cords to the ETERNUS DX60/DX80.
The power unit for each enclosure is duplicated. The power cords
IMPORTANT
must be connected to the inlets of both power units (PSU#0 and
PSU#1).
Connect the power cord plugs to the power inlets of the Power Supply Units.
Drive enclosure
Controller
enclosure
Power cord plug
Attach the release tie to the plug of the power outlet for the power plug not to be
unplugged.
Release tie
Inlet
101
Copyright 2009 FUJITSU LIMITED