Chapter 4 Setup
>
4.3 ETERNUS DX60/DX80 Setup
5
5-1
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
For SAS
On the [Setup SAS Host] screen, set the SAS address, and other items for the server
being connected to the ETERNUS DX60/DX80.
(1)
Click the [Add] button on the [Setup SAS Host] screen
(2)
Specify a SAS address, server name, and host response.
Figure 4.19 [Setup SAS Host] screen
(3)
Specify the other necessary items, and click the [OK] button.
The target SAS host is displayed in the "Registered SAS Host List" field.
(4)
Click the [Next] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Setup an affinity group.
Create the group of volumes that are to be recognized by the server (affinity group).
Set an affinity group when using the Host Affinity function. When not
IMPORTANT
using the Host Affinity function, click the [Next] button and proceed to
[Define LUN Mapping].
Click the [Create] button.
126
Step 5
appears.
Copyright 2009 FUJITSU LIMITED