Chapter 5 Installing Optional Products
>
5.2 Drive Enclosure Installation
7
8
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
CAUTION
•
Fix the drive enclosure in the rack.
Use the two thumb screws at the front of the drive enclosure to fasten it in the rack.
Thumb screw
Attach the "DE_No." label to the following positions.
Attach the label starting at the top (miniSAS cable (for drive enclosures) connection order)
on the controller enclosure.
At the right side of the
front of the drive enclosure
DE_No. label
Do
Two pieces of tape are attached to the top of the controller
enclosure. Make sure that this tape does not come off.
Tape
(Rear rack pillars)
Between the EXP#0 and EXP#1 expanders
at the rear of the drive enclosure
169
Copyright 2009 FUJITSU LIMITED