Fujitsu Eternus DX60 User Manual page 97

Chapter 4 Setup
> 4.2 Cable Connection
-
-
P3AM-3042-03ENZ0 ETERNUS DX60/DX80 Disk storage system User Guide
The following shows the miniSAS connection figure between controller enclosure and
drive enclosure.
Do not connect anything to the SAS (OUT) port on the end edge.
IMPORTANT
For single controller model
Drive
enclosure 1
Controller
enclosure
Figure 4.1 MiniSAS cable connection
(between the controller enclosure and drive enclosure)
(single controller model)
For dual controller model
Drive
enclosure 1
Controller
enclosure
Figure 4.2 MiniSAS cable connection
(between the controller enclosure and drive enclosure)
(dual controller model)
EXP#0
CM#0
EXP#0
CM#0 CM#1
97
EXP#1
Copyright 2009 FUJITSU LIMITED