Chapter 4 Setup
>
4.3 ETERNUS DX60/DX80 Setup
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
For iSCSI
On the [Setup iSCSI Host] screen, set the iSCSI name, IP address, and other items for the
server being connected to the ETERNUS DX60/DX80.
(1)
Click the [Add] button on the [Setup iSCSI Host] screen
(2)
Specify an iSCSI name, IP address, server name, host response, and CHAP pass-
word.
Figure 4.18 [Setup iSCSI Host] screen
(3)
Specify the other necessary items, and click the [OK] button.
The target iSCSI host is displayed in the "Registered iSCSI Host List" field.
(4)
Click the [Next] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
125
Step 5
appears.
Copyright 2009 FUJITSU LIMITED