Fujitsu Eternus2000 Manual page 116

4.3 ETERNUS2000 Setup
4
5
92
Select the port whose topology is to be set, from the port list in the left of the
screen.
Set the connection topology and click the [Finish] button.
For the Fibre Channel type
Set Connection Topology.
"FC-AL Connection" is preset in the factory. When using Fibre Channel switches, change to "Fab-
ric Connection", and then set the host connection details.
On the detailed port settings screen, set the Transfer Rate to match that of the connected server or
Fibre Channel switch (4GB, 2GB, or 1GB).
Refer to "ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance- for models 100 and
200" for details.
Figure 4.9 Port settings (topology settings) screen (for Fibre Channel)
Copyright 2009 FUJITSU LIMITED
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN