About This Manual - Fujitsu Eternus2000 Manual

This guide introduces the ETERNUS2000 to the user and explains how to check and maintain the
ETERNUS2000 on a regular basis.
Refer to the manuals for each peripheral concerning details not included in this manual.
Organization
This manual is organized as follows:
• Chapter 1 Overview
This chapter provides an external view of the ETERNUS2000, and explains the special features,
data configurations of RAID groups, and specifications of the ETERNUS2000.
• Chapter 2 Hardware
This chapter describes the hardware components of the ETERNUS2000 and details of the basic
operation methods of the ETERNUS2000, such as how to turn the power on and off.
• Chapter 3 Installation
This chapter describes the ETERNUS2000 installation.
• Chapter 4 Setup
This chapter describes how to connect and setup the ETERNUS2000 for operation.
• Chapter 5 Installing Optional Products
This chapter describes how to attach optional products.
• Chapter 6 Operation and Troubleshooting
This chapter describes points to note when operating and performing maintenance for the
ETERNUS2000. Also, this chapter describes how to respond to any problems which may occur.
Read this chapter when operating or performing maintenance on the ETERNUS2000, or if an error
"Specifications" and "Events detected by ServerView" are described as appendixes.
Refer to the manuals for each peripheral concerning details not included in this manual.
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide

About this Manual

Copyright 2009 FUJITSU LIMITED
v