Power Cord Connection - Fujitsu Eternus2000 Manual

4.2 Cable Connection
4.2.6

Power Cord Connection

Connect the power cords to the ETERNUS2000.
76
Do Not
WARNING
• Do not disconnect the power cord plug with wet hands as it may lead
to fire or electrical shock.
• Do not attempt to repair a damaged power cord. Do not pull on,
excessively bend/twist, apply heat or place heavy objects on the cord.
Doing so will damage the cord, which may lead to fire or electrical
shock.
• Do not put the stress on the root of the power cord, for example, by
twisting it. Doing so may expose or cut the cable core of the power
code, causing fire or electric shock
• Do not use the power cord if it is damaged or the plug does not snugly
fit into the socket as it may cause fire or electrical shock.
• Do not use a power cord other than one attached, or the one speci-
fied. Do not use the attached power cord or specified power cord for
other devices. Doing so may cause failure, fire, or electric shock.
Do
• Wipe clean any excess dust from the plug prongs or socket with a dry
cloth. Failure to do so, may lead to fire or electrical shock.
Ground
CAUTION
• Use a power code with ground lead. Using a power code without
ground lead may cause fire, electric shock, or malfunction.
ETERNUS2000 disk storage system User Guide
Copyright 2009 FUJITSU LIMITED
P3AM-2512-03EN