Chapter 3 Installation; Preparation; Placement Area - Fujitsu Eternus2000 Manual

Chapter 3
Installation
This chapter describes the ETERNUS2000 installation procedure.
Before installing the device, make sure to check the "ETERNUS2000 disk storage system models 100 and
200 Safety Precautions".
3.1

Preparation

3.1.1

Placement Area

Installation area
Refer to the placement area of the rack to install the device.
Installation condition
Refer to "Instructions for installation" in "ETERNUS2000 disk storage system models 100 and 200 Safety
Precautions" and set the device in a location where all the requirements are satisfied.
IMPORTANT
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
The speed of the ETERNUS2000 fans is stepped up and down in
response to the ambient temperature.
Up to 25°C the noise level should not exceed about 42dB, but higher
temperatures or abnormal fan situations can result in noise levels over
42dB, and seclusion in a dedicated server room is generally recom-
mended.
Copyright 2009 FUJITSU LIMITED
3
45