5
Referring to the information recorded in
WWN or host affinity of the new Fibre Channel card in the ETERNUS2000.
When the setting is complete, confirm that the server can access the ETERNUS2000.
6.4.2
When Replacing the LAN Card / iSCSI HBA
The following explains how to replace a failed server-side LAN card or iSCSI HBA.
Note that this is only an overview of the replacement procedure. Refer to the relevant manuals for more
details.
Refer
The procedure to replace the LAN card / iSCSI HBA is as follows:
Procedure
1
Turn off the server that LAN card / iSCSI HBA is replaced.
2
Replace the LAN card / iSCSI HBA.
For details about replacing procedures, refer to the user guide for the specific LAN card / iSCSI
HBA.
When the setting is complete, confirm that the server can access the ETERNUS2000.
6.4.3
When Replacing the SAS Card
The following explains how to replace a failed server-side SAS card.
Note that this is only an overview of the replacement procedure. Refer to the relevant manuals for more
details.
Refer
P3AM-2512-03EN
ETERNUS2000 disk storage system User Guide
• User guide for the LAN card / iSCSI HBA
• "ETERNUS8000, ETERNUS4000, ETERNUS2000 Server Connec-
tion Guide (iSCSI)"
• "ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
• User guide for the SAS card
• "ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
Copyright 2009 FUJITSU LIMITED
Chapter 6 Operation and Troubleshooting
Step
1, Register the information such as
6
151