5.2 Drive Enclosure Installation
7
8
9
10
134
Connect the miniSAS cable (for drive enclosures).
Refer to
"4.2.5 MiniSAS Cable Connection (For Drive Enclosures)" (page 71)
procedure.
Connect the drive enclosure's power cord.
The drive enclosure turns on.
Refer to
"4.2.6 Power Cord Connection" (page 76)
Check all the "Expansion procedure" checkboxes, and click the [Next >] button.
The drive enclosure recognition process is performed.
When the process completes, the drive enclosure's power-on procedure screen is displayed.
Check that the drive enclosure POWER LED and READY LED are on.
Copyright 2009 FUJITSU LIMITED
for the appropriate procedure.
Drive enclosure
ETERNUS2000 disk storage system User Guide
for the appropriate
P3AM-2512-03EN