5.3 Battery Unit Installation
7
8
142
Click the [Next >] button.
The fan unit isolation process starts.
Remove the fan unit after the FAN STATUS LED changes to orange.
Holding the lock tab down, pull the fan unit straight out of its slot.
The following example shows a fan unit installed in the bottom of the device.
Lock tab
FAN STATUS LED
Fan unit
• Hold the fan unit with both hands to protect against jarring.
IMPORTANT
• Fan units that have been removed should be disposed of as
Copyright 2009 FUJITSU LIMITED
industrial waste. When disposing of, ask the sales person in
charge.
ETERNUS2000 disk storage system User Guide
P3AM-2512-03EN