Fujitsu Eternus2000 Manual page 114

4.3 ETERNUS2000 Setup
4.3.1.1 Network Environment settings (Setting1)
Set the network environment of the ETERNUS2000.
For details on the settings, refer to "ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-".
Procedure
1
2
3
4
90
"ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
Refer
Click the [Setting1] button in the [Tutorial] wizard.
Setting1: starting [Network Environment settings] screen appears.
Click the [Execute] button.
A screen to set the network environment appears.
Set the required items, for example, IP address and subnet mask for MNT port,
and click the [Finish] button.
Figure 4.7 Network environment setting screen
A confirmation screen appears.
Click the [Yes] button.
After completing the setting successfully, the setting1 screen is closed. A screen to confirm auto-
matic logoff appears. Click the [OK] button.
Device setting operation cannot be continued if the IP address is
IMPORTANT
changed. Logon again with the new IP address is required.
Copyright 2009 FUJITSU LIMITED
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN