System Status Check - Fujitsu Eternus2000 Manual

4.7 System Status Check

4.7 System Status Check
Check the following settings using the system status display function of the setting/maintenance program.
• ETERNUS2000 parts status
• RAID group status
• Volume status
Component status display
The status of the ETERNUS2000 can be checked by general status lamp in the upper right of setting/main-
tenance program screen. When the general status lamp is
the ETERNUS2000. Check the status of each component in system status display screen of ETERNUS
Administrator Window.
A blinking lamp is displayed above the components icon in the tree, which is in the left of the system status
display screen, for components with an error.
When the color of blinking lamp is red, a failure occurred and the parts need to be replaced. Contact your
sales engineer or maintenance engineer.
Figure 4.24 General status lamp
116
"ETERNUS2000 ETERNUSmgr User Guide -Settings/Maintenance-"
Refer
Copyright 2009 FUJITSU LIMITED
(red), an error occurs in the components of
ETERNUS2000 disk storage system User Guide P3AM-2512-03EN