Fujitsu Eternus2000 Manual page 109

4
Connect the power cords (AC input cables) (4m) supplied with the AC outlet box
to the inlet of the AC outlet box.
AC outlet box
AC outlet box
P3AM-2512-03EN ETERNUS2000 disk storage system User Guide
Note:
The ETERNUS2000 is shipped with the power code connected to the inlets.
A
B
Do Not
WARNING
• Do not connect power cords or other cables during thunder-
storms, as lightning can result in fire or electric shock.
Do
CAUTION
• Be sure to fully insert each plug into its socket. Failure to do so
may lead to fire or electrical shock.
Do Not
• When disconnecting the power plug, be sure to pull from the
plug and not the cord. Pulling the cord may expose or snap the
inner wires, which can lead to fire or electrical shock.
• Do not use the server service outlet to connect the device
power cord.
• Do not overload an electrical outlet. Doing so may lead to elec-
tric shock or fire.
Unplug
• If the ETERNUS2000 is not going to be used for a long period
of time, it is advisable to unplug all power cords to avoid any
chance of fire to the ETERNUS2000 and its peripherals.
Copyright 2009 FUJITSU LIMITED
AC input cables
Chapter 4 Setup
Connect to
outlet
4
85