Fujitsu ETERNUS DX100 S3 Operation Manual page 66

Disk storage system
Hide thumbs Also See for ETERNUS DX100 S3:
Table of Contents

Advertisement

Chapter 5
Expansion Functions
5.1
Installing Additional Drives
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives
have been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings on the new drives, as required.
For Drives for High-density Drive Enclosures
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Do
Hold the drive with both hands to protect against jarring.
Step 3
and
Step
66
Copyright 2014 FUJITSU LIMITED
Lock lever
4.
P3AM-7662-04ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx200 s3

Table of Contents