Fujitsu ETERNUS DX100 S3 Operation Manual page 69

Chapter 5 Expansion Functions
5.1 Installing Additional Drives
8
Open the top board.
9
Remove the dummy drive unit from the slot in which the drive is to be installed.
(1)
Pull the catch on the lock lever of the dummy drive unit to unlock the lock lever, and then open
the lock lever upward.
(2)
Pull up the dummy drive unit in a straight direction.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
69
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0