Toshiba Carrier MMU-AP0182H2UL Service Manual page 103

No. Part name
1. Detachment
Electric parts
2
cover
1) Carry out work of Detachment of
2) Remove the fixing screw "A" which fixes
3) Pull down the electric parts cover, remove
4) Remove the hinge unit and then remove
2. Attachment
1) Attach the hinge unit of the electric parts
2) Close the electric parts cover and slide it,
3) Tighten the fixing screws "A and B" and
4) Following to work of Attachment of
Procedure
the electric parts cover and loosen the
fixing screw "B".
pin of the bell mouth and then slide it to
the arrow direction in order to open the
claws and the electric parts box cover.
the electric parts box cover.
box cover.
hook claw of the electric parts box, claw
of the electric parts box cover and the
Dharma doll hole, and then insert pin of
the bell mouth into hole of the electric
parts box cover.
then fix the electric parts box cover.
mount the suction grille as before.
Bell mouth pin
.
Fixing screw "B" Fixing screw "B" Fixing screw
Fixing screw "A" Fixing screw "A" Fixing screw
1 ,
103
Remarks
Claw of
electric parts box
Potbelly hole
(Dharma doll hole)
Sliding Sliding Sliding
direction direction direction
Claw of electric Claw of electric Claw of electric
parts box cover parts box cover parts box cover
Hinge Electric parts box cover