Toshiba Carrier MMU-AP0182H2UL Service Manual page 125

No. Part name
1. Detachment
3 Electric
parts box
1) Carry out works of Detachment of
2) Remove the power supply wire and the
remote control wire and control wires from
the terminal blocks.
3) Remove the power supply wire from cord
clamp at side of the electric parts box.
4) Remove screws (M4, 0.39"(10 mm), 2 pcs.))
of the electric parts box and pull out
downward.
5) Hook the hooking section temporarily at the
rear side of the electric parts box to the
sheet fittings part of the main unit.
2. Attachment
1) Insert the square hole of the electric parts
box into the claw of the main unit.
2) Attach screws (M4, 0.39"(10 mm), 2 pcs.))
to the electric parts box.
3) Connect the power supply wire and the
remote control wire and control wires as
before.
4) Carry out works of Attachment of
Procedure
1 and
1 and
125
Remarks
2 .
Control wiring/Remote
control terminal block
Pull out the cord clamp Pull out the cord clamp Pull out the cord clamp
while pushing "Button while pushing "Button" while pushing
toward the arrow mark direction. toward the arrow mark direction. toward the arrow mark direction.
2 .
Hooking sections
of electric parts box
Square hole of
electric parts box
Claws of main unit
Power supply
terminal block
Cord clamp
Cord clamp Cord clamp Cord clamp
Button"
Screw
p p
Sheeted folding up
section of main unit