Page 2
1 Make sure the appliance is unplugged. The steam boost function can only be used at ENGLISH temperature settings between 3 and MAX. 2 Set the steam control to position O (= no steam) (Fig. 2). 1 Press and release the steam boost button (Fig. 8). Introduction Wait a while before you use the button again to avoid 3 Tilt the iron backwards. Congratulations on your purchase and welcome to spluttering.
8 After you have used the Calc-Clean function, Troubleshooting press down the steam control while you turn it to This chapter summarises the most common problems you could encounter with the appliance. If you are unable to position O. solve the problem with the information below, contact the Consumer Care Centre in your country. Note: Repeat the Calc-Clean process if the water that comes Problem Cause...