Table of Contents
Advertisement
Front terminal panel
1 FRONT/REAR Terminal Select Button
Use this button to enable the RGB INPUT terminal on either the front or
the rear panel. This button affects the RGB INPUT connector and AU-
DIO jack only.
2 RGB Input Connector (Mini D- Sub 15 pin)
Connect an analog RGB output of your PC or component output of your
DVD player.
3 RGB AUDIO Input Mini Jack
Connect an audio output of the RGB equipment connected to the above
RGB INPUT connector.
NOTE: When inputting stereo signal(R/L), connect the L/MONO mini jack of the
RGB equipment or use a commercially available RCA conversion cable.
4 S-VIDEO Input Connector (Mini DIN 4 pin)*
Connect an S-Video output of a video equipment such as VCR.
5 VIDEO Input Connector (RCA)*
Connect a video output of a video equipment such as VCR.
6 AUDIO Input Jacks (RCA)
Connect an audio output of the video equipment connected to S-VIDEO
or VIDEO INPUT .
For monaural audio, connect it to L/MONO.
* NOTE: The front terminals take preference over the rear terminals when both
terminals are connected to a VCR.
Unplugging cables from both the VIDEO and the S-VIDEO connectors on the
front panel enables the VIDEO and S-VIDEO connectors on the rear.
The S-VIDEO or VIDEO connector on the front panel takes effect by inserting the
cable either the S-VIDEO or the VIDEO connector.
STATUS
POWER
ON/STAND BY
FRONT/
REAR
RGB INPUT
1
2
S-VIDEO
VIDEO
RGB
AUTO ADJUST
L / MONO
R
AUDIO
S-VIDEO
VIDEO
AUDIO
3
4
5
6
E – 10
SELECT
Advertisement
Table of Contents
