NEC RT50X User Manual page 19

50” lcd rear projection display
Table of Contents

Advertisement

OFF
VIDEO
S-VIDEO
SELECT
12
14
HELP
16
17
12. ENTER (Left Click) Button
When you are in the Computer mode, this button works as the mouse
left button.
When this button is pressed and held for a minimum of 1. 5 seconds,
the drag mode is set.
When you are in the rear projection display mode, (indicated by the
lighted PJ button):
Use this button to enter your menu selection. It works the same way as
the "Enter" button on the cabinet.
13. CANCEL (Right Click) Button
When you are in the Computer mode, this button works as the mouse
right button.
When you are in the rear projection display mode, (indicated by the
lighted PJ button):
Press this button to exit "Menus". It works the same way as the Cancel
button on the cabinet.
14. PJ Button
Press this button to switch the Select, Cancel, and Enter buttons be-
tween the rear projection display mode (lit red)and the Computer mode.
Press this button or any one of the Power ON/OFF, Menu, Help, Pointer
or Magnify buttons to switch to the Rear projection display mode and
the PJ button lights red. To switch back to the Computer mode, press
the PJ button again.
ON
POWER
RGB
AUTO ADJ.
13
PJ
POINTER
15
ASPECT
MUTE
18
MAGNIFY
19
VOLUME
20
15. POINTER Button
Press this button to display one of the eight pointers;press again to hide
the pointer. You can move your pointer icon to the area you want on the
screen using the Select button.
16. HELP Button
Provides information about operation and adjustment procedures or
the set information for the current menu or adjustment during menu
operation.
17. ASPECT Button
Press this button to display the Aspect Ratio select window.
Each time this button is pressed, the current aspect ratio will change
as follows:
Normal → Zoom → Wide Zoom → Cinema → Normal → . . .
You can also select the aspect ratio by using the Select or button. If no
adjustments are performed within 3 seconds, the Aspect Ratio select
window will disappear. (See also page E-32. )
18. MUTE Button
This button turns off the sound for a short period of time. Press again to
restore the sound.
19. MAGNIFY +/- Button
Use this button to adjust the image size up to 400%. See also page E-
27. )
When the Pointer is displayed, the magnified image is displayed at the
center of the Pointer. When the Pointer is not displayed, the magnified
image is displayed at the center of the screen.
When the image is magnified, the pointer is changed to the magnifying
icon.
20. VOLUME +/- Button
Press (+) to increase the volume and (–) to decrease it.
NOTE: The default is the Computer mode, which allows you to use the SELECT,
CANCEL, and ENTER buttons as your computer mouse. When the POWER ON/
OFF, MENU, POINTER, HELP, ASPECT or MAGNIFY button is pressed, the PJ
button lights red to indicate that you are in the Rear projection display mode. If
no buttons are pressed within 10 seconds, the light goes out and the Rear
projection display mode is canceled.
E – 13

Advertisement

Table of Contents
loading

Table of Contents