Removing Media; Emergency Optical Drive Tray Release; Using The Media Player Software - Fujitsu Lifebook E752 User Manual

Removing Media

Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will
1
come out of the LIFEBOOK notebook a short distance.
Gently pull the tray out until the disc can easily be removed from the tray.
2
Carefully remove the media disc from the holder tray, then push the holder tray back in until you hear a click.
3

Emergency Optical Drive Tray Release

If for some reason the eject button fails, you can
open the media tray with a paper clip or similar tool
inserted into the eject hole in the right side of the
front of the tray. Straighten one side of a paper clip
and push it gently into the hole. The tray will pop
out.

Using the Media Player Software

D
EPENDING UPON ITS CONFIGURATION
REFERENCE THE DOCUMENTATION THAT ACCOMPANIES THE MEDIA APPLICATION
Starting a DVD Movie (DVD Models only)
Insert the DVD into the optical drive of the notebook. If the DVD AutoRun feature activates, skip Step 2.
1
The first time you insert a movie into the optical drive tray, you will be prompted to select what you want the
2
system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection,
you will receive the same prompt whenever you insert a disc.
Click OK to close the About DVD Player Performance dialog box and the movie will begin.
3
,
YOUR SYSTEM MAY NOT HAVE THE MEDIA PLAYER SOFTWARE PRE
67 - Optical Drive
Figure 20. Emergency Tray Release
-
INSTALLED
.
. I ,
F IT IS NOT INSTALLED