Port Replicator Problems; Hard Drive Problems; Keyboard Or Mouse Problems - Fujitsu Lifebook E752 User Manual

Problem
LIFEBOOK notebook fails to
recognize Blu-ray/DVD/CD-
RW/CD-ROM's. (continued)
The drive access indicator
on the Status Indicator
Panel blinks at regular inter-
vals with no disc in the tray
or the drive is not installed.

Port Replicator Problems

Note: Be sure to power down your LIFEBOOK notebook before adding a printer to the Port Replicator parallel port.
Notebook does not turn on
when installed in the
optional Port Replicator

Hard Drive Problems

You cannot access your
hard drive.

Keyboard or Mouse Problems

The built-in keyboard does
not seem to work.
Possible Cause
The disc is dirty or defective.
The Windows auto insertion
function is active and is
checking to see if a disc is
ready to run.
Port Replicator AC adapter is
not plugged in.
Notebook is not properly
seated in port replicator.
The wrong drive designator
was used by an application
when a bootable disc was
used to start the notebook.
Security is set so your OS
cannot be started without a
password.
The notebook has gone into
Sleep mode.
The application has locked
out the keyboard.
Possible Solutions
Wipe the disc with a non-abrasive CD cleaning cloth and reinsert. It if still will
not work try another disc in the drive.
This is normal. However, you may disable this feature.
Provide power to the Port Replicator.
Remove and re-dock your LIFEBOOK notebook.
Verify drive designator used by application is in use by the operating system.
When the operating system is booted from a CD, drive designations are auto-
matically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart your system.
90 - Troubleshooting