Phone Directory - Sony SPP-A2480 Service Manual

Spp-a2480 cordless telephone with answering system spp-s2430 cordless telephone
Hide thumbs Also See for SPP-A2480:
Table of Contents

Advertisement

Enter successive numbers in the same way.
When the phone number of 16 digits or more
has been entered, the phone number appears in
two lines.
7
Turn Jog Dial to choose "[PGM]", and then
press Jog Dial.
You hear a long confirmation beep, and the
name and the number are stored.
The display goes off.
Notes
• Names cannot be entered using the dialing keys.
• Do not allow more than 20 seconds to elapse during the operation procedure.
Tips
• When you select "[GO BACK]", you can return to the previous set display by
pressing Jog Dial.
• If you have entered a wrong name or number in step 4 or 6, turn Jog Dial to
choose "[P]" then press Jog Dial or press (ERASE) to erase it. Then enter the
correct name or number.
• You may press (PROGRAM) instead of doing steps 5 and 7.
• Phone numbers can be entered using the dialing keys in step 6.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 6 on page 38, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Turn Jog Dial to choose "[P]" and then press Jog Dial, or
press (REDIAL/PAUSE).
Changing a stored name and/or phone number
1
Display the name you want to change by doing
steps 1 to 3 on page 37.
The cursor is at the right of the name.
2
Turn Jog Dial to choose "[P]", then press Jog
Dial to erase the characters, and enter the new
name.
If you want to change only the number, skip this
step.

Phone Directory

You can dial a number by scrolling through the Phone Directory.
Both the base phone and the cordless handset can each store up to 50
separate numbers.
Storing phone numbers and names
Turn
Press
Note
If you try to save a 51st phone number, you will hear five short error beeps and
"THE MEMORY IS FULL." will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 43).
SONY
1234567890123456
12_
0123456789*#
F P VIP PGM
ENTER NAME
SONY_
ABCDEFGHIJKLMNOP
QRSTUVWXYZ
SWITCH
NUMBER
continued
39
Telephone Features
1
Press (PROGRAM).
(Cordless handset)
HANDSET MENU
GO BACK
PHONE DIRECTORY
ONE-TOUCH DIAL
QUICK TALK
If "PHONE DIRECTORY" is
not selected, turn Jog Dial to
select it.
2
Press Jog Dial. (If you're at the
base phone, press Jog Button
(ENTER).)
"ENTER NAME" appears on
the display.
ENTER NAME
_
ABCDEFGHIJKLMNOP
QRSTUVWXYZ
SWITCH NUMBER
3
Enter the name and the phone
number by doing steps 4 to 7 on
pages 38 to 39.
continued
41
Telephone Features
One-touch dialing (continued)
3
Turn Jog Dial to choose "[NUMBER]", and then
press Jog Dial.
The cursor is at the right of the phone number.
4
Turn Jog Dial to choose "[P]", then press Jog
Dial to erase the number, and enter the new
number.
If you don't want to change the number, skip
this step.
5
Turn Jog Dial to choose "[PGM]", and then
press Jog Dial.
You hear a long confirmation beep and the
name and/or the number is changed.
Note
The stored record with name and number can be replaced with a new name and
number but it is not possible to erase the whole entry at one time.
Tips
• Single character and number can be erased by pressing (ERASE) in steps 2
and 4.
• You may press (PROGRAM) instead of doing steps 3 and 5.
Making calls with one-touch dialing
1
Press (TALK) or (LONG DIST. SAVER) and wait until "TALK"
appears on the display.
2
Press one of the ONE-TOUCH DIAL buttons ((A) to (C)).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the cordless handset is not in use, press one of the ONE-TOUCH
DIAL buttons ((A) to (C)).
The number stored on the button appears on the display for 20
seconds. To dial the number, press (TALK) while the number is
displayed.
US
US
40
Telephone Features
Phone Directory (continued)
Changing a stored name and/or phone
number
1
Display the name you want to change by doing
steps 1 to 3 on pages 44 to 45.
2
Press Jog Dial. (If you're at the base phone, press
Jog Button (ENTER).)
3
Turn Jog Dial to choose "EDIT", and then press
Jog Dial (or Jog Button (ENTER)).
The cursor is at the right of the name.
4
Change the name and/or the phone number by
doing steps 2 to 5 on pages 39 to 40.
US
US
42
Telephone Features
– 12 –
SONY
1234567_
0123456789*#
F P VIP
PGM
BROWN JOHN
SONY
SMITH JOHN
SALINGER GREG
WAGNER ANTHONY
GO BACK
DIAL
LONG DISTANCE
EDIT
ERASE DIRECTORY
ENTER NAME
SONY_
ABCDEFGHIJKLMNOP
QRSTUVWXYZ
SWITCH
NUMBER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spp-s2430Spp-a9276

Table of Contents