Sony RCP-TX7 Operating Instructions Manual page 11

7 IRIS/M.BLACK LINK (iris/master black
adjustment link) button
Press this button (which lights when pressed) to
perform linked adjustments of iris and master black for
several cameras.
For details, see "Adjusting the Iris and Master Black of
Multiple Cameras at One Time" on page 27.
8 CALL button
Press this button (which lights when pressed) to light
the CALL button and red tally indicator on the camera,
CA, and CCU. This button lights when the unit
receives a tally signal from the CA or CCU.
9 Master black adjustment block
Use the knob to adjust the master black. During
adjustment, adjustment value is shown in the display
window here.
0 MASTER GAMMA knob
Use this knob to adjust the master gamma. During
adjustment, adjustment value is shown on the LCD
panel in the menu operation/setting display section 2.
!¡ DETAIL knob
Use this knob to adjust the master detail. During
adjustment, adjustment value is shown on the LCD
panel in the menu operation/setting display section 2.
!™ Shutter setting block
Use the buttons described below to set the shutter's
operation mode, speed, and CLS (clear scan)
frequency.
Name Operation
C. SCAN (clear Press this button (which lights when
scan) button pressed) to set the CLS frequency. This
button does not operate when the TLCS
(total level control system) is operating.
SHUTTER ON/ Press this button (which lights when
OFF button pressed) to set the shutter speed. This
button does not operate when the
camera's TLCS is operating.
4 (up) button Each press of this button raises the CLS
frequency or shutter speed setting value
by one step. (The CLS frequency value
changes continuously while the button is
being pressed.)
Press the up and down buttons
simultaneously to select the minimum
value.
$ (down) button Each press of this button lowers the CLS
frequency or shutter speed setting value
by one step. (The CLS frequency value
changes continuously while the button is
being pressed.)
Press the up and down buttons
simultaneously to select the minimum
value.
Display window Displays the current CLS frequency when
the C.SCAN button is lit.
Displays the current shutter speed when
the ON button is lit.
11