Sony RCP-TX7 Operating Instructions Manual page 19

Menu title Knob/button
OTHERS (10/11: GAIN button
COMM LINK ITEM-1)
For details, see page
SHUTTER button
27.
OTHERS (11/11: WHITE button
COMM LINK ITEM-2)
For details, see page
BLACK button
27.
FLARE button
a)
AUTO SKIN (2/3) ON/OFF buttons
HI-POSI knob: –99 to 00 +99
V-POSI knob: –99 to 00 +99
a)
AUTO SKIN (3/3) ON/OFF buttons
WIDTH knob: –99 to 00 +99
HEIGHT knob: –99 to 00 +99
a) This menu is recalled with the AUTO SETUP SKIN DETAIL button on page 6.
When using the DXC-637 series
Only the OTHERS menu contains the advanced setting
pages.
Menu title Knob/button
KNEE (1/2) PRESET button
VARIABLE button
KNEE (2/2) MANUAL KNEE knob:
–99 to 00 to +99
RECALL
SCENE F. RECALL button
See page 23 for
SEL knob: USR01 to USR16
details.
STORE SCENE F. STORE button
See page 23 for
details.
CUR knob
SEL knob: USR01 to USR16
CHR knob:
MATRIX STD/FL/H.SAT buttons
Setting or operation
Activate command link operation of gain setting among
several cameras.
Activate command link operation of shutter setting among
several cameras.
Activate command link operation of manual white balance
adjustment among several cameras.
Activate command link operation of manual black balance
adjustment among several cameras.
Activate command link operation of manual flare correction
among several cameras.
Select whether or not you will display the window specifying
the skin gate on the viewfinder screen. (When the AUTO
SKIN menu is recalled, the ON button is automatically
selected.)
Horizontal position of the window
Vertical position of the window
Select whether or not you will display the window specifying
the skin gate on the viewfinder screen. (When the AUTO
SKIN menu is recalled, the ON button is automatically
selected.)
Width of the window
Height of the window
Underlined values or settings are selected at the
shipping of the camera.
Setting or operation
Setting the knee point (level at which the knee correction
starts) manually using the preset values (see page 9).
Setting the knee point manually (see page 9) . A value can
be set by the knob in the knee correction block or the
MANUAL KNEE knob on page 2/2 of the KNEE menu.
Knee point (As the value becomes larger, the start level
lowers, which enhances the knee correction effect.)
Press to recall a scene file stored in this unit's memory.
Select a scene file that you will recall.
Press to store a scene file onto this unit's memory. Use the
SEL knob to number the file.
Move the cursor to enter a file name (eight characters).
Select a number for the file that you will store.
Select characters to enter a file name.
Select color matrix adjustment mode.
STD: standard
FL: for shooting under fluorescent lighting
H.SAT: high saturation (increasing the saturation of primary
colors)
(continued)
19