Handling Paper Jams; Scan Parameter Settings - Toshiba GL-10x0 Scan Operator's Manual

Handling Paper Jams

In the event of a paper jam, the copier displays procedures on the control
panel to assist you with resolving the problem. When the jam is cleared,
the message Jam Recovery appears on the screen.
Continuing after Clearing a Jam
Press
Cancelling a Job after Clearing a Jam
1 Press C
opens.
2 Press Y
Error Handling
When you are using the ADF, if the job stops due to an error, such as Job
Overflow, during the continuous scanning of multiple originals, data
being read at the time of the error is canceled.
Data that was read before the error occurred is stored.
Note: Template settings can be edited from the TopAccess (End User
Mode) web site.

Scan Parameter Settings

A template icon represents each template that was set up using the
TopAccess web utility. Scan parameters, such as resolution, rotation, and
exposure are defined when you create the templates.
The Scan Settings and Agent Settings Summary screen displays the
settings for the template you selected.
To change these scan parameter settings:
1 Press S
screens in total).
2 Select the required single/double-sided scan option:
Tablet
The book and tablet double-sided modes are unavailable if you are
scanning from the glass.
3 Select the desired rotation:
180°
GL-10x0 Scan Operator's Guide
or S ! to continue the ADF scan.
START CAN
or
J
ANCEL OB
to cancel the Job. To prevent cancellation, press N
ES
to open the Scan Parameter Setting screens (three
ETTING
.
, or
Rotate through 270°
to cancel a job. The Cancel Confirm screen
FC
,
No rotation
.
Single
,
Rotate through 90° Rotate through
.
O
, , or
Book
31