Error Messages - Toshiba GL-10x0 Scan Operator's Manual

Error Messages

Message
Scan kit Internal Error (SK1)
Scan kit Internal Error (SK2)
Select either Public or Private scan.
Private scan may require a
password.>
Internal memory used is NN%.
Select either Public or Private scan.
Private scan may require a
password. > Shared memory used
is NN%.
Scan Kit Internal Error (SK3)
Scan Kit Internal Error (SK4)
Scan Kit Internal Error (SK5)
Scan Kit Internal Error (SK6)
Finish glass Scan (Max page
reached)
Finish glass Scan (A document is on
ADF)
60
Error Messages Defined
Memory issues. Restart the controller. If the controller is
not restored, contact the Network Administrator.
Memory issues. Restart the controller. If the controller is
not restored, contact the Network Administrator.
Determine the job in progress by reviewing the Scan
Jobs screen in TopAccess. When a job is present, either
wait for it to complete, or delete it. If the job will not
complete, delete it. If the error persists, restart the
controller. If the error still persists after restarting the
controller, contact the Network Administrator.
Delete unnecessary data stored on the controller. Use
the GL TWAIN Driver to delete data from the GL_TWAIN
folder, or an appropriate application to delete data from
the GL_SHARE folder.
Cannot create the directory, no free space or the
controller does not have the necessary permissions.
Free up space and restart the controller. If the controller
is not restored, contact the Network Administrator.
Database access error. Database may be corrupt.
Restart the controller. If the controller is not restored,
reinstall the controller software. If the controller is still not
restored, contact the Network Administrator.
Controller/copier interface issues. Restart both the
controller and the copier. If the controller is not restored
after restarting, contact the Network Administrator.
Scanning cannot be started due to the copier status,
such as a misfeed in the document feeder or the feeder
may be open. Make sure that the operation on the copier
is correctly set up and then retry scanning.
The number of pages has reached the maximum (100
pages or 200 images if duplex). Finish scanning.
A document on the glass is being scanned. Wait until the
current scan process is complete before using the ADF
scan function.
Action (End User)
GL-10x0 Scan Operator's Guide