Huawei IP Phone eSpace 7810
User Manual
Parameter
Type
Min Delay
Max Delay
Normal Delay
Tones
In the Tones area, you can select preset tones or define new tones, as shown in
Figure 3-11 Setting tones
Table 3-11
Table 3-11 Parameters in the Tones area
Parameter
Select country
Dial
Ring Back
Busy
Issue 01 (2012-06-27)
Description
collected, stored, and sent to the voice processor.
Type of the jitter buffer.
Minimum delay.
Maximum delay.
Normal delay.
lists parameters in the Tones area.
Description
Country that has custom signal tones.
Dial tone that is played after you pick up the phone or press the
SPK key.
RBT that is played when the called phone rings.
Busy tone that is played when an outbound call failed or the
current account cannot make outgoing calls.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring eSpace 7810
Figure
3-11.
39