O p e r a t i n g Y o u r S y s t e m
Using the Front Panel
This section describes the functions of the front panel during normal
operation.
Note
Do not place any weight, either by leaning or by placing objects, on the fascia
surrounding the front panel. Otherwise you may inadvertently press one or more of
the front panel buttons.
Figure 2-5 Front Panel Controls
1.
Diagnostic LCD
2.
Power On Button
3.
Control Button
4.
Standby Button
Buttons
♦
P
O
OWER
N
Standby mode. The Power LED will light up and the system will
initiate its boot sequence. Diagnostic codes, expressed as
hexadecimal numbers, will appear as a matter of course on the LCD
screen on the Front Panel (see the separate document Diagnostic
Codes Reference Guide for details). The screen will display the SCSI ID
2-8 OWNER'S HANDBOOK
1
2
3
4
5.
Reset Button
6.
Infrared Sensor
7.
UPS LED
8.
Power LED
- Press this button to switch the system on from
5
6
7
8