Table of Contents
Advertisement
4
SERVICE INFORMATION
If a problem should develop in your server, the usual on-site procedure
for correcting it is to replace the faulty component. The procedures in this
chapter should be followed if it becomes necessary to remove or refit a
server component.
Note
Only authorized engineers may carry out the procedures described in this chapter.
Otherwise your computer's warranty will be void.
There are specific procedures for removing and fitting the following
items:
♦
Hard Disk Drive
♦
Hard Disk Drive Module
♦
Front Bezel
♦
Front Panel
♦
Removable Media Drives
♦
System Management Controller Board
♦
System Management Controller Cooling Fan Assembly
♦
Cooling Fan and Handguard
♦
Hard Disk Drive Cooling Fan Assembly
♦
Hard Disk Drive Module Backplane
♦
Motherboard Power Distribution Panel
♦
Motherboard
♦
Motherboard Cooling Fan Assembly
♦
Hard Disk Drive Power Distribution Panel
♦
5.25-inch Bay Power Distribution Panel
♦
Loudspeaker
♦
Uninterruptible Power Supply Unit
♦
UPS Battery Pack
Your Apricot has been designed so that in most cases you can remove a
component without disturbing adjacent items.
The procedures for removing or fitting CPU cards, memory cards and
other expansion cards are not presented in this chapter. For these, refer to
Chapter 3, Upgrading Your System.
O w n e r ' s H a n d b o o k
OWNER'S HANDBOOK 4-1
Advertisement
Table of Contents
