Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual page 172

Chapter B: Routed Topology Configuration Information
ITS Wireless Subnet
The ITS infrastructure devices reside on the ITS wireless subnet which has a subnet
address of 172.31.240.0.
Router A is configured with an IP address of 172.31.240.2.
Router B is configured with an IP address of 172.31.240.3.
ITS_CORE_1 is configured with an IP address of 172.31.240.10 and connects to
port 24 on Router A from port 24.
ITS_CORE_2 is configured with an IP address of 172.31.240.11 and connects to
port 24 on Router B from port 24.
ITS_CORE_1 and ITS_CORE_2 have redundant connections to each other using
their uplink ports.
APC_1 is configured with an IP address of 172.31.241.0.
APC_2 is configured with an IP address of 172.31.241.1.
Since there is only one Sync Unit on the ITS, it is considered to be the Master Sync
Unit and its front-panel Cable Delay Switch is set to 1.
There are eight 1.4 GHz Access Points on the ITS. They are named AP_1 to AP_8.
The Access Points are assigned IP addresses ranging from 172.31.242.0 (AP_1) to
172.31.242.7 (AP_8).
DBS 1
ICN_1_CORE is configured with an IP address of 172.31.0.10 and connects to
Port 1 on Router A from Port 23 and to Port 1 on Router B from Port 24. The
standalone IIC on ICN Database Domain 1 is configured with an IP address of
172.3.1.3.32.
DBS 2
ICN_2_CORE is configured with an IP address of 172.31.8.10 and connects to
Port 2 on Router A from Port 23 and to Port 2 on Router B from Port 24. The
standalone IIC on ICN Database Domain 2 is configured with an IP address of
172.3.1.11.32.
DBS 3
ICN_3_CORE is configured with an IP address of 172.31.16.10 and connects to
Port 3 on Router A from Port 23 and to Port 3 on Router B from Port 24. The
standalone IIC on ICN Database Domain 3 is configured with an IP address of
172.3.1.19.32.
B-4