Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual page 88

Chapter 3: Installing and Configuring the ITS
b) Copy the appropriate AP and APC image files from the Network Tools
3. Disable the proxy settings in the Internet Explorer prior to running and using the
Upgrade Wizard:
a) Run Internet Explorer on the service PC connected to the ITS subnet.
b) Select Tools>Internet Options>Connections and then click LAN settings.
3-10
C:\TelemetryUpgrader\AP and APC Images - APC A.00.29\
C:\TelemetryUpgrader\AP and APC Images - APC A.00.32\
C:\TelemetryUpgrader\AP and APC Images - APC A.00.34\
C:\TelemetryUpgrader\AP and APC Images - APC B.00.15\
The AP and APC images must reside in separate folders under the
folder to ensure that files can be located by
\TelemetryUpgrader
application
UPGRADER.EXE
CD-ROM to the appropriate folder you created in step a.
Note the following firmware file naming conventions:
1.4 GHz AP firmware files are named:
2.4 GHz AP firmware files are named:
APC firmware files are named:
Figure 3-1 shows an example of a directory structure that would allow the
Upgrade Wizard to locate and install AP and APC image files. You may want
to create a similar directory structure on your service PC to store the APC
and AP firmware files so that they may be located properly by the Philips
Upgrade Wizard.
Copy AP and APC
Firmware Files from
These Folders to Appropriate
Folder on Your Service PC
Figure 3-1: Sample Directory Structure for the Philips Upgrade Wizard
.
WMTS_AP.IMG
ROW_AP.IMG
.
WMTS_APC.IMG
.
.