Setting Clock Semiautomatically - Semiauto Clock Set - JVC HD-DH5US Instructions Manual

18
EN
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. /time zone
setting manually.
First follow steps A to B on page 17, then go to the
following steps.
C
Access Auto Clock Set screen
Press [FG] to move
the arrow to "AUTO
CLOCK SET", then
press [OK].
Then;
To select the host channel — go to step D.
To select the D.S.T. mode — go to step E.
To select the time zone — go to step F.
NOTE:
The time set previously will be erased when "AUTO
CLOCK SET" is selected.
D
Select host channel
You can either select
"AUTO" or enter a
PBS channel number.
Press [FG] to move
the arrow to "HOST
CH", then press [D
E] until "AUTO" or
the desired PBS
channel number is
selected.
NOTE:
Some PBS channels do not transmit clock setting data.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
AUTO CLOCK SET
MANUAL CLOCK SET
AUTO CLOCK ON
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP
AUTO CLOCK SET TIME : AM DATE 1/1 (THU) 2004
HOST CH [TV] AUTO
D.S.T AUTO
TIME ZONE AUTO
RETURN
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT
INITIAL SETTINGS (cont.)
E
Select D.S.T. mode
You have three choices:
"AUTO"– Select if you want to adjust your VCR's
clock automatically by the incoming
signal from the host channel. (Auto
Daylight Saving Time*)
"ON"– Adjustment will be made by the built-
in clock itself.
"OFF"– Select when Daylight Saving Time
does not apply to you.
Press [FG] to move the arrow to "D.S.T.", then
press [D E] repeatedly until the desired setting is
selected.
F
Select time zone
Press [FG] to move the arrow to "TIME ZONE",
press [D E] repeatedly until "AUTO" or the
desired time zone is selected.
Each time you press the button, the time zone
changes as follows:
U"AUTO" U "ATLANTIC" U "EASTERN"
U "CENTRAL" U "MOUNTAIN" U "PACIFIC"
U "ALASKA" U "HAWAII" U (back to the
beginning)
NOTE:
If an incorrect clock time is displayed by the Plug & Play
setting, you may be receiving the clock setting data of a
PBS channel from an adjacent time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" for the host channel in step D, be
sure to select the correct time zone manually.
G
Return to normal screen
Press [MENU].
IMPORTANT:
Turn off the VCR after performing Semiauto Clock Set.
[AUTO] will appear on the front display panel while the
clock is being set. The current clock time will appear
automatically when the clock setting is complete.