JVC HD-DH5US Instructions Manual page 85

CODE
300 "CAN NOT DECODE VIDEO OR AUDIO
USE SET TOP BOX OR HDTV TUNER"
301 "TOO MANY i.LINK INSTRUMENTS READ
INST.BOOK"
302 "COPY RESTRICTED PROG OUTPUT 480i
VIDEO"
303 "VIDEO SIGNAL IS NOT FOUND FOR
THIS PROGRAM"
304 "THIS PROGRAM CAN NOT PLAY BACK
THE CONTENT IS NOT ACCEPTABLE"
305 "OUTPUT PROHIBITED DUE TO TV
WITHOUT HDCP COPY PROTECTION"
* For details of a digital tuner, refer to the instruction manual of the digital tuner.
MESSAGE DESCRIPTION
• A signal format that is not supported by this VCR was
input.
• Use a digital tuner*, etc.
• A signal containing too much data was input to the
i.LINK connector on this VCR.
• There are too many devices with i.LINK connectors,
such as VCRs and digital video cameras, connected to
the i.LINK connector on this VCR. Turn off any devices
that are not in use.
• When playing back a program that was copy protected
in 1080i, 720p, or 480p mode, the VCR down-converts
to 480i mode for output.
• An attempt was made to play back a tape that does not
contain video signal.
• An attempt was made to play back a tape that contains
copy information that is not compatible with this VCR.
• An error has occurred due to an attempt to output
through the HDMI output connector to the TV that is
not HDCP-compliance.
85
EN