Timer Recording; Vcr Plus+ C 3 ® Timer Programming - JVC HD-DH5US Instructions Manual

40
EN
VCR Plus+ C
Timer
Programming
•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
[POWER]
A
[TIMER(j)]
VCR CABLE
TV
/DBS
B
E
C
[DAILY]
[BACK]
3
Timer recording allows you to program the VCR to
®
automatically record a broadcast at some future time.
Up to 24 timer recording programs can be made using VCR
Plus+ timer programming or Express timer programming
method (A page 44) as far as a year in advance.
The VCR Plus+ timer programming system eliminates the
need to input channel, date, start and stop time data when
programming timer recording settings. Simply key in the
PlusCode number for the TV broadcast you wish to record
and the VCR's timer will be automatically programmed.
(The PlusCode programming numbers are the numbers
next to the program in most TV listing.)
A
B
[POWER]
H
[TIMER ( )]
C
F
[WEEKLY]
C D
G

TIMER RECORDING

Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
•
The VCR turns on, and the counter is reset,
automatically.
Access VCR Plus+ screen
Press [PROGRAM] on
TIMER PROGRAM
the Remote.
•
The clock must be
set to access the
VCR Plus+ screen.
If you have not set
the clock, the Main
Menu screen
appears after an
error message is
displayed. Refer to
page 17 for the
clock setting
procedure.
Enter PlusCode number
Press the appropriate
TIMER PROGRAM
'Number' keys to
input the PlusCode
number printed in the
TV listings for the TV
broadcast you wish to
record, then press
PROG.
EXIT
[OK].
Then;
If the Guide Channel Set screen appears
— go to step .
D
If the VCR Plus+ Program screen appears
— go to step .
E
•
To make corrections, press [CANCEL] and input
the correct PlusCode number.
•
If an incorrect PlusCode number or one where
the broadcast already ended has been inputted,
"PLUSCODE NO. ERROR CONFIRM
PLUSCODE NO. THEN RETRY" is displayed for
about 5 seconds, then the VCR Plus+ screen
reappears.
PLUSCODE NUMBER SET
SET
PROG.
PRESS NUMBER KEYS [0-9] OR
PRESS [+/ ] TO SET EXPRESS PROGRAMMING
EXIT START STOP DATE CH
PLUSCODE NUMBER SET
1 2 3 4 5
SET
PRESS NUMBER KEYS [0-9] OR
PRESS [+/ ] TO SET EXPRESS PROGRAMMING
START STOP DATE CH