Tuner Setting; Setting Channels Automatically - Auto Channel Set - JVC HD-DH5US Instructions Manual

20
EN

Tuner Setting

•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR
CABLE
TV
/DBS
A D
Setting channels automatically
— Auto Channel Set
Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add or
delete channels, use Manual Channel Set (A page 21).
A
B
C
B - C
D
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side
of "BAND" on the Tuner Set Up screen.
INITIAL SETTING (cont.)
Access Main Menu screen
Press [MENU].
Access Tuner Set Up screen
A Press [D E] to
FUNCTION SET UP
move the arrow to
"TUNER SET UP",
then press [G] or
[OK].
B Press [D E] to
move the arrow to
"TUNER SET",
then press [G] or
[OK].
Perform Auto Channel Set
You can
FUNCTION SET UP
automatically set the
receivable channels
in your area in the
order of their
frequencies.
Press [FG] to move
the arrow to "AUTO
CH SET", then press
[OK].
NOTES:
FUNCTION SET UP
•
When Auto Channel
Set is complete,
"SCAN COMPLETED"
appears on screen.
•
If the scan was
unsuccessful, "SCAN
COMPLETED – NO
SIGNAL FOUND –"
appears on screen.
Check the
connections, then
select "RETRY" to start
again, or select
"EXIT".
Return to normal screen
Press [MENU].
TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
BAND TV
AUTO CH SET
MANUAL CH SET
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT
TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
BAND TV
AUTO CH SET
MANUAL CH SET
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
AUTO CHANNEL SET
SCANNING...
PRESS [MENU] TO END
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT