•
Turn on the VCR and the TV, and select the AV
mode on the TV.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
VCR
CABLE
TV
/DBS
B G
Setting cable box input channel &
brand
After installation, set the cable box input channel and its
brand correctly; otherwise, the Controller cannot work
correctly.
A
B
C
C - F
D
Turn on cable box
Select a channel other than channel 9 on your
cable box.
Access Main Menu screen on VCR
Press [MENU].
Access Cable Set Up screen
A Press [D E] to
FUNCTION SET UP
move the arrow to
"TUNER SET UP",
then press [G] or
[OK].
B Press [D E] to
move the arrow to
"CABLE SET UP",
then press [G] or
[OK].
Select cable box input channel
Press [FG] to move
FUNCTION SET UP
the arrow to "INPUT
CH".
Your selection
depends on how your
cable box is
connected to your
VCR.
•
If your cable box is connected to your VCR's
[ANTENNA IN] terminal on the rear panel
Press [D E] until the channel number
representing the cable box's output ("ON CH2 –
ON CH9") appears on the screen.
•
If your cable box is connected to your VCR's
[AUDIO/VIDEO] input connectors on the front
panel
Press [D E] until "ON F-1" appears on the
screen.
•
If your cable box is connected to your VCR's
[AUDIO/VIDEO INPUT (L-1)] or [AUDIO/
VIDEO INPUT (L-2)] connectors on the rear
panel
Press [D E] until "ON L-1" or "ON L-2"
appears on the screen.
•
If you do not use a cable box
Press [D E] until "OFF" appears on the screen.
23
EN
TUNER SET UP
INITIAL SET UP
TUNER SET
CABLE SET UP
DBS SET UP
INPUT CH
OFF
BRAND
1
TEST MODE
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
TUNER SET UP
INITIAL SET UP
CABLE SET UP
INPUT CH
OFF
BRAND
1
TEST MODE
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT
SELECT